Sewage Pumps
— FWS-FWC Series
— FGR Series
— FLV Series
FGR Series
Cast Iron submersible wastewater lift pumps with grinder unit
These series of grinder pumps are particularly used in civil and industrial sewage plants. They have been designed to pump the liquid at high head with very low capacity. The cutter unit, in a special hard stainless steel, cuts into small pieces threadlike materials contained in the liquids. As the risk of clogging is avoided small diameter pipes are used.
These pumps can be used to lift the sewage of blocks of flats and villas, small isolated areas far from the sewer systems; the sewage of hotels and campsites, in the food and paper industry and in those particular situations where the installation is often expensive by using a gravity system.
Applications
- Domestic / industrial grey water
- Wastewater
40FGR 50 Hz
| Materials/Constr.design | ||
| Impeller with grinder unit | Cast iron EN GJL200 | |
| External casing | Stainless steel AISI304 | |
| Pump body | Cast iron EN GJL200 | |
| Cover | Cast iron EN GJL200 | |
| Grinder unit | Hardened stainless steel | |
| Mechanical seal | motor side | Seal ring |
| pump side | Silicon carbide (SiC/SiC) | |
| Motor shaft | Stainless steel AISI416 | |
| Power cable | Type | 10 m H07RN-F type |
| Single-phase | 4G1mm², capacitor box and SCHUKO plug (CEE 7/VII) | |
| Three-phase | 4G1mm² | |
| Motor | ||
| Constr.design | asynchronous squirrel cage-type in dry chamber | |
| Type | 2 poles; 50 Hz | |
| Insulation class | F | |
| Protection degree | IP68 | |
| Voltage | Single-phase | 230V ±6% built-in overheating protection, float switch as optional |
| Three-phase | 230V ±10%, 400V ±10% | |
| Limits of use | ||
| Maximum liquid temperature | + 40°C | |
| pH of pumped liquid | 6 - 10 | |
| Liquid density | 1,0 kg/dm³ | |
| Maximum immersion depth: | 5 m | |
| Min. immersion depth for continuos service | 303 mm | |
| Max. number of starting/hour | 20 | |
| Construction options | ||
| 60 Hz version | ||
| Different voltages | ||
| White oil filling liquid FDA aproved | ||
50FGR 50 Hz
| Materials/Constr.design | ||
| Impeller with grinder unit | Cast iron EN GJL200 | |
| External casing | Cast iron EN GJL200 | |
| Pump body | Cast iron EN GJL200 | |
| Cover | Cast iron EN GJL200 | |
| Grinder unit | Hardened stainless steel | |
| Mechanical seal | motor side 50FGR-52-1,6 / 50FGR-52-2,2 | Graphite/Alumina |
| pump side | Silicon carbide (SiC/SiC) | |
| Motor shaft | Stainless steel AISI431 | |
| Power cable | Type | 10 m H07RN-F type |
| Single-phase 50FGR-52-1,1M | 4G1mm², capacitor box and SCHUKO plug (CEE 7/VII) | |
| Single-phase 50FGR-52-1,6M | 4G2,5mm², capacitor box and SCHUKO plug (CEE 7/VII) | |
| Three-phase | 4G1,5mm² | |
| Motor | ||
| Constr.design | asynchronous squirrel cage-type oil filled | |
| Type | 2 poles; 50 Hz | |
| Insulation class | F | |
| Protection degree | IP68 | |
| Voltage | Single-phase | 230V ±6% built-in overheating protection (up to 1,1 kW), float switch as optional |
| Three-phase | 230V ±10%, 400V ±10% | |
| Limits of use | ||
| Maximum liquid temperature | + 40°C | |
| pH of pumped liquid | 6 - 10 | |
| Liquid density | 1,0 kg/dm³ | |
| Maximum immersion depth: | 5 m | |
| Min. immersion depth for continuos service | 50FGR-52-1,1M/T | 373 mm |
| 50FGR-52-1,6M/T / 50FGR-52-2,2T | 440 mm | |
| Max. number of starting/hour | 20 | |
| Construction options | ||
| 60 Hz version | ||
| Different voltages | ||
| White oil filling liquid FDA aproved | ||
40 FGR 50 Hz
| Pump model | Phase | Q = Delivery | |||||||
| l/sec 0 | 0,5 | 1 | 1,5 | 2 | 2,5 | 3 | 3,5 | ||
| m³/h 0 | 1,8 | 3,6 | 5,4 | 7,2 | 9 | 10,8 | 12,6 | ||
| US gpm 0 | 7,9 | 15,8 | 23,7 | 31,7 | 39,6 | 47,5 | 55,5 | ||
| H = Total meters head of water column [m] | |||||||||
| 40FGR-52-0,75 | 1 ~ | 18,5 | 17,4 | 16,2 | 14 | 11,6 | 8,5 | 1,3 | |
| 3 ~ | 18,5 | 17,4 | 16,2 | 14 | 11,6 | 8,5 | 1,3 | ||
| 40FGR-52-1,1 | 1 ~ | 21 | 19,7 | 18,5 | 16,6 | 14,2 | 11,2 | 7,8 | 1 |
| 3 ~ | 21 | 19,7 | 18,5 | 16,6 | 14,2 | 11,2 | 7,8 | 1 | |
50 FGR 50 Hz
| Pump model | Phase | Q = Delivery | ||||||||||
| l/sec 0 | 0,5 | 1 | 1,5 | 2 | 2,5 | 3 | 3,5 | 4 | 4,5 | 5 | ||
| m³/h 0 | 1,8 | 3,6 | 5,4 | 7,2 | 9 | 10,8 | 12,6 | 14,4 | 16,2 | 18 | ||
| US gpm 0 | 7,9 | 15,8 | 23,7 | 31,7 | 39,6 | 47,5 | 55,5 | 63,4 | 71,3 | 79,2 | ||
| H = Total meters head of water column [m] | ||||||||||||
| 50FGR-52-1,1 | 1 ~ | 21 | 19 | 17 | 15,8 | 14 | 12 | 9,5 | 8,8 | 7,8 | 5,8 | 2 |
| 3 ~ | 21 | 19 | 17 | 15,8 | 14 | 12 | 9,5 | 8,8 | 7,8 | 5,8 | 2 | |
| 50FGR-52-1,6 | 1 ~ | 27 | 25 | 21 | 20,5 | 19 | 18 | 15,5 | 14,5 | 13 | 10 | 5 |
| 3 ~ | 27 | 25 | 21 | 20,5 | 19 | 18 | 15,5 | 14,5 | 13 | 10 | 5 | |
| 50FGR-52-2,2 | 3 ~ | 34 | 32 | 29,5 | 27,5 | 25,7 | 23,8 | 22 | 20 | 17,5 | 15 | 10 |
