Bơm thoát nước
– Dòng
FDR– Dòng FDP
FDP Series
Máy bơm chìm để thoát nước chuyên nghiệp
40-50 FDP: Máy bơm điện chìm bằng gang và thép không gỉ, thích hợp để thoát nước trong và đục. Chúng có thể được sử dụng như máy bơm di động sẵn sàng sử dụng cho cả sử dụng tại công trường xây dựng, giếng tầng hầm và để lắp đặt cố định với bảng điều khiển. 70-80-100-150 FDP: Máy bơm điện chìm thích hợp để thoát nước trong và đục. Thích hợp để sử dụng trên các công trường xây dựng và để bơm chất lỏng, bao gồm cả chất mài mòn. Do xử lý của họ, họ có thể dễ dàng vận chuyển.
Ứng dụng
- Thoát nước và khử nước
- Thu hồi nước mưa
- Xây dựng công trường thoát nước và khử nước
- Khai thác mỏ, khai thác đá, thoát nước và khử nước
- Thoát nước lũ khẩn cấp
Related Products
40-50FDP 50 Hz
| Materials/Constr.design | ||
| Open impeller | Cast iron EN GJL200 | |
| External casing | Aluminium alloy EN AW6060 | |
| Pump body | Aluminium alloy | |
| Cover | Aluminium alloy | |
| Filter | Aluminium alloy | |
| Wear plate | 40FDP-52-1,0M | Stainless steel AISI304 |
| 50FDP-52-1,4M, 50FDP-52-1,8M | Aluminium alloy with rubber coating | |
| Mechanical seal | Silicon carbide (SiC/SiC) | |
| Motor shaft | Stainless steel AISI420 | |
| Power cable | Type | 10 m H07RN-F type |
| Single-phase 40FDP-52-1,0M | 4G1,5mm², capacitor box and SCHUKO plug (CEE 7/VII) | |
| Single-phase 50FDP-52-1,4M, 50FDP-52-1,8M | 4G2,5mm², capacitor box and SCHUKO plug (CEE 7/VII) | |
| Three-phase | 4G1,5mm² | |
| Motor | ||
| Constr.design | asynchronous squirrel cage-type oil filled | |
| Type | 2 poles; 50 Hz | |
| Insulation class | F | |
| Protection degree | IP68 | |
| Voltage | Single-phase | 230V ±6% built-in overheating protection (up to 1,1 kW), float switch as optional |
| Three-phase | 230V ±10%, 400V ±10% | |
| Limits of use | ||
| Maximum liquid temperature | + 40°C | |
| pH of pumped liquid | 5 - 8 | |
| Liquid density | 1,0 Kg/dm³ | |
| Maximum immersion depth: | 5 m | |
| Min. immersion depth for continuos service | see “Dimensional drawings” | |
| Free passage | 6 mm | |
| Max. number of starting/hour | 20 | |
|
Construction options: - 60 Hz version - Different voltages - Food-grade white oil |
||
40FDP-HH 50Hz
| Materials/Constr.design | ||
| Double open impeller | Cast iron EN GJL200 | |
| External casing | Aluminium alloy EN AW6060 | |
| Pump body | Aluminium alloy | |
| Cover | Aluminium alloy | |
| Filter | Aluminium alloy | |
| Wear plate | Stainless steel AISI304 | |
| Mechanical seal | Silicon carbide (SiC/SiC) | |
| Motor shaft | Stainless steel AISI431 | |
| Power cable | Type | 10 m H07RN-F type |
| Single-phase | 4G2,5mm², capacitor box and SCHUKO plug (CEE 7/VII) | |
| Three-phase | 4G1,5mm² | |
| Motor | ||
| Constr.design | asynchronous squirrel cage-type oil filled | |
| Type | 2 poles; 50 Hz | |
| Insulation class | F | |
| Protection degree | IP68 | |
| Voltage | Single-phase | 230V ±6%, float switch as optional |
| Three-phase | 230V ±10%, 400V ±10% | |
| Limits of use | ||
| Maximum liquid temperature | + 40°C | |
| pH of pumped liquid | 5 - 8 | |
| Liquid density | 1,0 Kg/dm³ | |
| Maximum immersion depth: | 5 m | |
| Min. immersion depth for continuos service | 331 mm | |
| Free passage | 6 mm | |
| Max. number of starting/hour | 20 | |
|
Construction options: - 60 Hz version - Different voltages - Food-grade white oil |
||
70/80FDP 50Hz
| Materials/Constr.design | ||
| Open impeller | Martensitic stainless steel | |
| External casing | Aluminium alloy | |
| Pump body | Aluminium alloy | |
| Cover | Aluminium alloy | |
| Filter | Stainless steel AISI304 | |
| Wear plate | Graphite/Alumina | |
| Mechanical seal | Silicon carbide (SiC/SiC) | |
| Motor shaft | Stainless steel AISI420 | |
| Power cable | Type | 10 m H07RN-F type |
| Single-phase 70FDP-52-2,2M | 4G2,5mm², capacitor box and SCHUKO plug (CEE 7/VII) | |
| Three-phase 80FDP-52-4,1T | 4G2,5mm² | |
| Three-phase | 4G1,5mm² | |
| Motor | ||
| Constr.design | asynchronous squirrel cage-type in dry chamber | |
| Type | 2 poles; 50 Hz | |
| Insulation class | F | |
| Protection degree | IP68 | |
| Voltage | Single-phase | 230 V ±6% |
| Three-phase | 230V ±10%, 400V ±10% | |
| Limits of use | ||
| Maximum liquid temperature | + 40°C | |
| pH of pumped liquid | 5 - 8 | |
| Liquid density | 1,1 Kg/dm³ | |
| Maximum immersion depth: | 5 m | |
| Min. immersion depth for continuos service | 457 mm | |
| Free passage | 6 mm | |
| Max. number of starting/hour | 20 | |
|
Construction options: - 60 Hz version - Different voltages - With coating in composite material for wear protection (possible variations of the hydraulic performance) |
||
100FDP 50Hz
| Materials/Constr.design | ||
| Open impeller | High chrome cast iron | |
| External casing | Stainless steel AISI304 | |
| Pump body | Cast iron EN GJL 200 with rubber coating | |
| Cover | Cast iron EN GJL250 | |
| Filter | Stainless steel AISI304 | |
| Wear plate | Cast iron EN GJL 250 with rubber coating | |
| Mechanical seal | motor side | Graphite/Alumina |
| pump side | Silicon carbide (SiC/SiC) | |
| Motor shaft | Stainless steel AISI431 | |
| Power cable | Type | 20 m S1RN8-F type |
| Three-phase 100FDP-52-5,5T, 100FDP-52-6,5T | 4G2,5+3x1mm² | |
| Three-phase 100FDP-52-8,1T | 4G4+3x1mm² | |
| Motor | ||
| Constr.design | asynchronous squirrel cage-type in dry chamber | |
| Type | 2 poles; 50 Hz | |
| Insulation class | F | |
| Protection degree | IP68 | |
| Voltage | Three-phase | 400V ±10% |
| Limits of use | ||
| Maximum liquid temperature | + 40°C | |
| pH of pumped liquid | 6 - 10 | |
| Liquid density | 1,1 Kg/dm³ | |
| Maximum immersion depth: | 15 m | |
| Min. immersion depth for continuos service | 150 mm | |
| Free passage | 10 mm | |
| Max. number of starting/hour | 15 | |
|
Construction options: - 60 Hz version - Different voltages - Inner control of the thermal probes in the winding, control sequence and lack of phase (on request) |
||
100/150 FDP-LH/HH 50HZ
| Materials/Constr.design | ||
| Open impeller | High chrome cast iron | |
| External casing | Stainless steel AISI304 | |
| Pump body | Cast iron EN GJL 200 with rubber coating | |
| Cover | Cast iron EN GJL250 | |
| Filter | Stainless steel AISI304 | |
| Wear plate | Cast iron EN GJL 250 with rubber coating | |
| Mechanical seal | motor side | Graphite/Alumina |
| pump side | Silicon carbide (SiC/SiC) | |
| Motor shaft | Stainless steel AISI431 | |
| Power cable | 20 m 7G4+2x1,5mm², 07RN-F type | |
| Motor | ||
| Constr.design | asynchronous squirrel cage-type in dry chamber | |
| Type | 2 poles; 50 Hz | |
| Insulation class | F | |
| Protection degree | IP68 | |
| Voltage | Three-phase | 400V ±10% |
| Limits of use | ||
| Maximum liquid temperature | + 40°C | |
| pH of pumped liquid | 6 - 10 | |
| Liquid density | 1,1 Kg/dm³ | |
| Maximum immersion depth: | 15 m | |
| Min. immersion depth for continuos service | 200 mm | |
| Free passage | 6 mm | |
| Max. number of starting/hour | 10 | |
|
Construction options: - 60 Hz version - Different voltages - Inner control of the thermal probes in the winding, control sequence and lack of phase (on request) |
||
150FDP 50Hz
| Materials/Constr.design | ||
| Open impeller | Stainless steel AISI304 | |
| External casing | Aluminium alloy | |
| Pump body | Aluminium alloy with rubber coating | |
| Cover | Aluminium alloy | |
| Filter | Aluminium alloy | |
| Wear plate | Stainless steel AISI304 with rubber coating | |
| Mechanical seal | motor side | Graphite/Alumina |
| pump side | Silicon carbide (SiC/SiC) | |
| Motor shaft | Stainless steel AISI431 | |
| Power cable | 20 m 7G4+2x1,5mm², 07RN-F type | |
| Motor | ||
| Constr.design | asynchronous squirrel cage-type in dry chamber | |
| Type | 2 poles; 50 Hz | |
| Insulation class | F | |
| Protection degree | IP68 | |
| Voltage | Three-phase | 400V ±10% |
| Limits of use | ||
| Maximum liquid temperature | + 40°C | |
| pH of pumped liquid | 5 - 8 | |
| Liquid density | 1,1 Kg/dm³ | |
| Maximum immersion depth: | 15 m | |
| Min. immersion depth for continuos service | 350 mm | |
| Free passage | 7 mm | |
| Max. number of starting/hour | 10 | |
|
Construction options: - 60 Hz version - Different voltages
|
||
40-50FDP 50 Hz
| Pump model | Phase | Q = Delivery | |||||||||||||||
| l/sek. 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | ||
| m³/h 0 | 3,6 | 7,2 | 10,8 | 14,4 | 18 | 21,6 | 25,2 | 28,8 | 32,4 | 36 | 39,6 | 43,2 | 46,8 | 50,4 | 54 | ||
| US gpm 0 | 15,8 | 31,7 | 47,5 | 63,4 | 79,2 | 92,1 | 110,9 | 126,8 | 142,6 | 158,5 | 174,3 | 190,2 | 206 | 221,9 | 237,7 | ||
| H = Total meters head of water column [m] | |||||||||||||||||
| 40FDP-52-1,0 | 1 ~ | 18 | 16,5 | 15 | 13,5 | 11 | 8 | 4,5 | 1 | ||||||||
| 3 ~ | 18 | 16,5 | 15 | 13,5 | 11 | 8 | 4,5 | 1 | |||||||||
| 40FDP-52-1,1 | 3 ~ | 20 | 18,5 | 17 | 15,5 | 13,5 | 11 | 8,5 | 5 | ||||||||
| 50FDP-52-1,4 | 1 ~ | 14,3 | 14.1 | 13,7 | 13,1 | 12,5 | 11,8 | 11 | 9,8 | 8,5 | 7 | 6 | 4,5 | 2,8 | |||
| 50FDP-52-1,8 | 1 ~ | 16,6 | 16,3 | 16,1 | 15,8 | 15,1 | 14,2 | 14 | 12,8 | 11,8 | 10,2 | 9 | 7 | 5,8 | 4 | 2 | |
| 3 ~ | 16,6 | 16,3 | 16,1 | 15,8 | 15,1 | 14,2 | 14 | 12,8 | 11,8 | 10,2 | 9 | 7 | 5,8 | 4 | 2 | ||
| 50FDP-52-2,2 | 3 ~ | 18,5 | 18,5 | 18,2 | 17,8 | 17,5 | 16,5 | 16 | 14,7 | 13,9 | 12 | 10,5 | 9,1 | 7,5 | 5,8 | 4 | 2 |
40DFP HH 50 Hz
| Pump model | Phase | Q = Delivery | |||||||
| l/sek. 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ||
| m³/h 0 | 3,6 | 7,2 | 10,8 | 14,4 | 18 | 21,6 | 25,2 | ||
| US gpm 0 | 15,8 | 31,7 | 47,5 | 63,4 | 79,2 | 92,1 | 110,9 | ||
| H = Total meters head of water column [m] | |||||||||
| 40FDP-52-1,4 HH | 1 ~ | 31 | 27 | 23 | 19 | 14,5 | 10 | 5,2 | |
| 40FDP-52-1,8 HH | 1 ~ | 32 | 29,5 | 26 | 22 | 18 | 13 | 7,8 | 2 |
| 3 ~ | 32 | 29,5 | 26 | 22 | 18 | 13 | 7,8 | 2 | |
70-80FDP 50 Hz
| Pump model | Phase | Q = Delivery | ||||||||||
| l/sek. 0 | 2 | 4 | 6 | 8 | 10 | 12 | 15 | 20 | 25 | 28 | ||
| m³/h 0 | 7,2 | 14,4 | 21,6 | 28,8 | 36 | 43,2 | 54 | 72 | 90 | 100,8 | ||
| US gpm 0 | 31,7 | 63,4 | 92,1 | 126,8 | 158,5 | 190,2 | 237,7 | 317 | 396,2 | 443,8 | ||
| H = Total meters head of water column [m] | ||||||||||||
| 70FDP-52-2,2 | 1 ~ | 16 | 15 | 14 | 12,8 | 11,3 | 9,6 | 8 | 5 | |||
| 3 ~ | 16 | 15 | 14 | 12,8 | 11,3 | 9,6 | 8 | 5 | ||||
| 70FDP-52-3,5 | 3 ~ | 21 | 20,5 | 19,5 | 18,5 | 17 | 15,5 | 13,5 | 9,5 | 4 | ||
| 80FDP-52-4,1 | 3 ~ | 23,3 | 22,9 | 22,5 | 21 | 20,5 | 18,5 | 17,5 | 15,8 | 11,5 | 6,5 | 3,8 |
100FDP 50 Hz
| Pump model | Phase | Q = Delivery | |||||||||||
| l/sek. 0 | 2,5 | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | ||
| m³/h 0 | 9 | 18 | 36 | 54 | 72 | 90 | 100,8 | 108 | 144 | 162 | 180 | ||
| US gpm 0 | 39,6 | 79,2 | 158,5 | 237,7 | 317 | 396,2 | 443,8 | 475,5 | 634 | 713,3 | 792,5 | ||
| H = Total meters head of water column [m] | |||||||||||||
| 100FDP-52-5,5 LH | 3 ~ | 18,9 | 17,5 | 15,7 | 13,4 | 11,3 | 9,1 | 7 | 5,1 | 2,5 | |||
| 100FDP-52-5,5 HH | 3 ~ | 30 | 27,9 | 26 | 20,8 | 14,6 | 6,3 | ||||||
| 100FDP-52-6,5 LH | 3 ~ | 22,4 | 21,4 | 20 | 17,6 | 15,1 | 12,7 | 10,9 | 8,8 | 6,6 | 3 | ||
| 100FDP-52-6,5 HH | 3 ~ | 35,3 | 32,3 | 29,5 | 23,2 | 16,7 | 8,3 | ||||||
| 100FDP-52-8,1 LH | 3 ~ | 25,9 | 24,6 | 22,9 | 20,7 | 18,3 | 15,9 | 14,1 | 12,1 | 9,7 | 6,8 | 3 | |
| 100FDP-52-8,1 HH | 3 ~ | 45 | 40,7 | 36,6 | 28,8 | 20,2 | 10,1 | ||||||
100/150 FDP-LH / HH 50 Hz
| Pump model | Phase | Q = Delivery | ||||||||||||||
| l/sek. 0 | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | ||
| m³/h 0 | 18 | 36 | 54 | 72 | 90 | 100,8 | 108 | 144 | 162 | 180 | 198 | 216 | 234 | 252 | ||
| US gpm 0 | 79,2 | 158,5 | 237,7 | 317 | 396,2 | 443,8 | 475,5 | 634 | 713,3 | 792,5 | 871,8 | 951 | 1030,3 | 1109,5 | ||
| H = Total meters head of water column [m] | ||||||||||||||||
| 150FDP-52-11 LH | 3 ~ | 30 | 28,3 | 26,8 | 24,8 | 22,8 | 21 | 19,3 | 17,2 | 15,3 | 13 | 10,7 | 6,7 | 3 | ||
| 100FDP-52-11 HH | 3 ~ | 60 | 52,8 | 44,9 | 35,3 | 24 | 10 | |||||||||
| 150FDP-52-15 LH | 3 ~ | 32 | 30,6 | 29,3 | 27,8 | 26,4 | 24,3 | 22,3 | 20,3 | 18,5 | 16,6 | 14,8 | 12,4 | 10,1 | 6 | 2 |
| 100FDP-52-15 HH | 3 ~ | 62 | 54,6 | 48,4 | 42 | 35,1 | 25,8 | 16,4 | 2,3 | |||||||
150FDP 50 Hz
| Pump model | Phase | Q = Delivery | |||||||||||
| l/sek. 0 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | ||
| m³/h 0 | 72 | 90 | 100,8 | 108 | 144 | 162 | 180 | 216 | 252 | 288 | 324 | ||
| US gpm 0 | 317 | 396,2 | 443,8 | 475,5 | 634 | 713,3 | 792,5 | 951 | 1109,5 | 1268 | 1426,5 | ||
| H = Total meters head of water column [m] | |||||||||||||
| 150FDP-52-22 | 3 ~ | 35 | 32 | 31 | 29 | 28 | 26 | 24 | 22 | 18,5 | 15 | 11 | 5 |
